Catalog

show blocks helper

Showing 1–20 of 1161 results

ImageTeknorot Ref.MakeModelYear & Body TypeProduct GroupPositionOEM
H-345S 51450S1AE01| H-345S - Teknorot H-345S ACURA CL 2001-2003 & YA4 Control Arms Front Right Upper 51450S1AE01
H-346S 51460S1AE01| H-346S - Teknorot H-346S ACURA CL 2001-2003 & YA4 Control Arms Front Left Upper 51460S1AE01
H-278S 51350SNAA03| H-278S - Teknorot H-278S ACURA CSX 2005-2011 Control Arms Front Right Lower 51350SNAA03
H-279S 51360SNAA03| H-279S - Teknorot H-279S ACURA CSX 2005-2011 Control Arms Front Left Lower 51360SNAA03
H-345S 51450S1AE01| H-345S - Teknorot H-345S ACURA TL 1999-2003 & 2nd Gen, UA4-UA5 Control Arms Front Right Upper 51450S1AE01
H-346S 51460S1AE01| H-346S - Teknorot H-346S ACURA TL 1999-2003 & 2nd Gen, UA4-UA5 Control Arms Front Left Upper 51460S1AE01
AC-128 51350SEPA00| AC-128 - Teknorot AC-128 ACURA TL 2003-2008 & 3rd Gen, UA6-UA7 Control Arms Front Right Lower 51350SEPA00
AC-129 51360SEPA00| AC-129 - Teknorot AC-129 ACURA TL 2003-2008 & 3rd Gen, UA6-UA7 Control Arms Front Left Lower 51360SEPA00
H-384 51350TA0A00,51350TE1A00| H-384 - Teknorot H-384 ACURA TSX 2009-2014 & 2nd Gen CU2 Control Arms Front Right Lower 51350TA0A00, 51350TE1A00
H-385 51360TA0A00,51360TE1A00| H-385 - Teknorot H-385 ACURA TSX 2009-2014 & 2nd Gen CU2 Control Arms Front Left Lower 51360TA0A00, 51360TE1A00
AF-407S 60801529,82406868| AF-407S - Teknorot AF-407S ALFA ROMEO 164 1987-1998 Control Arms Front Right Lower 60801529, 82406868
AF-408S 60801528,82406867| AF-408S - Teknorot AF-408S ALFA ROMEO 164 1987-1998 Control Arms Front Left Lower 60801528, 82406867
AF-357S 50513442| AF-357S - Teknorot AF-357S ALFA ROMEO GIULIETTA 2010- & 940 Control Arms Front Right Lower 50513442
AF-358S 50513444| AF-358S - Teknorot AF-358S ALFA ROMEO GIULIETTA 2010- & 940 Control Arms Front Left Lower 50513444
F-486S 3521.S6,55703627,51895366,51783056,3521V5| F-486S - Teknorot F-486S ALFA ROMEO MITO 2008-2016 Control Arms Front Right 3521.S6, 55703627, 51895366, 51783056, 3521V5
F-487S 3520.W3,55703629,51895367,51783057,3520.Y4| F-487S - Teknorot F-487S ALFA ROMEO MITO 2008-2016 Control Arms Front Left Lower 3520.W3, 55703629, 51895367, 51783057, 3520.Y4
A-120S 3074071551C,811407147B,893407147G| A-120S - Teknorot A-120S AUDI 80 1972-1978 Control Arms Front 3074071551C, 811407147B, 893407147G
A-125S 893407148C| A-125S - Teknorot A-125S AUDI 80 1979-1986 Control Arms Front Right Lower 893407148C
A-126S 893407147C| A-126S - Teknorot A-126S AUDI 80 1979-1986 Control Arms Front Left Lower 893407147C
A-127S 893407148E| A-127S - Teknorot A-127S AUDI 80 1987-1991 Control Arms Front Right Lower 893407148E
Page 1 of 591 2 3 59

Damaged or bent control arms can effect vehicle ride dynamics, handling and alignment. Teknorot control arms are engineered to restore original performance and include bushings where applicable.

There are many components of the suspension system that operate together and in a proper way so that the vehicle could stay off the ground and present desirable handling and control on the ride. Based on design requirements, cars can have both an upper and a lower control arm at each side (driver & passenger) or only a pair of lower at each side. Each type of control arm has got rubber bushings at each of the pivot points, which aim to prevent friction and allow the wheels to return to their right positions after recieving the impacts from the road. Most control arms originate with these bushings. The rubber wears down with time or deteriorates with exposure to the elements. We can also face some problems with the control arm if the car hits a hard bump and end up bending the control arm. This is also a good time to check other elements of the suspension system for wear or breakage, especially if a hard bump has bent or damaged the control arm. Some control arm bushings require special tools to replace them, so it is often a better proposition to replace the entire arm, which comes with new rubber bushings. The suspension system provides flexibility to the vehicle, allowing it to adjust to the uneven roadways. Control arm aids this process by working with other suspension components to allow each wheel to flex independently, adjusting to the differing levels of the driving surface. This flexibility allows the tires of the vehicle to remain in good contact with the road for good vehicle stability and steering control. The steering and handling of the vehicle are given support by the control arm as it helps to keep the front end tight and in good alignment. Control arms can made up from different types of materials that require different kind of production capabilities. For all that, Teknorot offers every single type of control arm for targeted cars and markets where they are. Control arms that do not include a ball joint, especially in brands like BMW, Land Rover, Mercedes, Nissan, and Volvo, can be found in sheet metal, cast iron, forged iron, cast aluminum, injection aluminum and forged aluminum. Teknorot, with increasing production capacity, can respond to all control arm needs from the market.